Sentry Nodes
Last updated
Last updated
When setting up a validator there are countless ways to configure your setup. This guide is aimed at showing one of them, the sentry node design. This design is mainly for DDOS prevention.
The diagram is based on AWS, other cloud providers will have similar solutions to design a solution. Running nodes is not limited to cloud providers, you can run nodes on bare metal systems as well. The architecture will be the same no matter which setup you decide to go with.
The proposed network diagram is similar to the classical backend/frontend separation of services in a corporate environment. The “backend” in this case is the private network of the validator in the data center. The data center network might involve multiple subnets, firewalls and redundancy devices, which is not detailed on this diagram. The important point is that the data center allows direct connectivity to the chosen cloud environment. Amazon AWS has “Direct Connect”, while Google Cloud has “Partner Interconnect”. This is a dedicated connection to the cloud provider (usually directly to your virtual private cloud instance in one of the regions).
All sentry nodes (the “frontend”) connect to the validator using this private connection. The validator does not have a public IP address to provide its services.
Amazon has multiple availability zones within a region. One can install sentry nodes in other regions too. In this case the second, third and further regions need to have a private connection to the validator node. This can be achieved by VPC Peering (“VPC Network Peering” in Google Cloud). In this case, the second, third and further region sentry nodes will be directed to the first region and through the direct connect to the data center, arriving to the validator.
A more persistent solution (not detailed on the diagram) is to have multiple direct connections to different regions from the data center. This way VPC Peering is not mandatory, although still beneficial for the sentry nodes. This overcomes the risk of depending on one region. It is more costly.
The validator will only talk to the sentry that are provided, the sentry nodes will communicate to the validator via a secret connection and the rest of the network through a normal connection. The sentry nodes do have the option of communicating with each other as well.
The main aim of a sentry node is to protect our validator nodes from a huge number of queries thus overloading the port (DDOS).
Characteristics of a Sentry Node
The sentry node has to be a full-node
It has to be on a different server from the one you have your validator node on
It does not have to be in the same locale as your validator node
Having multiple sentry nodes would have even greater protection against
How you should configure your config.toml file for your VALIDATOR NODE/SENTRY NODE
pex: boolean. This turns the peer exchange reactor on or off for a node. When pex=false, only the persistent-peers list is available for connection. This should be set to** pex=false so it does not gossip to the entire network. The sentry nodes should be able to talk to the entire network hence why pex=true.**
seed_mode: boolean. The main function of the seed_mode is to provide more node addresses to the network. It will record all the node addresses that have been connected to it, and as long as you connect to it, it will tell you all the node information it records. This way you can connect to a node quickly. The seed node will disconnect from you immediately after giving you all the node information, so it is not recommended that the validator node enable the seed mode. This should be set to** seed_mode=false . **This should be set to seed_mode=false.
persistent-peers: a comma separated list of nodeID@ip:port values that define a list of peers that are expected to be online at all times. This is necessary at first startup because by setting pex=false the node will not be able to join the network. This should be configured to a list of sentry nodes.** **This should be configured to your any nodes that you trust, this includes your validator node, the Function X's nodes and other sentry nodes (optional).
unconditional_peer_ids: comma separated list of nodeID. These nodes will be connected to no matter the limits of inbound and outbound peers. This is useful for when sentry nodes have full address books. It can be filled with sentry node IDs (optional).** **Validator node ID, optionally sentry node IDs.
private_peer_ids: comma separated list of nodeID. These nodes will not be gossiped to the network. This is an important field as you do not want your validator IP gossiped to the network. This can be left empty as the validator is not trying to hide who it is communicating with.** **This should be configured to your validator node ID to ensure your validator node's ID is hidden.
addr_book_strict: boolean. By default nodes with a routable address will be considered for connection. If this setting is turned off (false), non-routable IP addresses, like addresses in a private network can be added to the address book. This should be set to** addr_book_strict=false. This should be set to addr_book_strict=false**.
double-sign-check-height int64 height. How many blocks to look back to check existence of the node's consensus votes before joining consensus When non-zero, the node will panic upon restart if the same consensus key was used to sign {double_sign_check_height} last blocks. So, validators should stop the state machine, wait for some blocks, and then restart the state machine to avoid panic. This should be configured to 10.** **This configuration is not important for sentry nodes.
seeds: Linked to the seed_mode configuration mentioned above, a seed node is a special node that allows the incorporation of new nodes to the network and maintains the strength of the network at all times, by allowing them to synchronize and obtain a copy of the data from the blockchain, replicating it and adding resistance and security to it. For validator nodes If you have already configured the persistent-peers to have a list of sentry nodes or nodes that you fully trust, then you can leave the seeds field empty. This seeds field should be configured to locate other peers.
Validator Node Configuration
seed_mode
false
pex
false
persistent-peers (nodeID@ip:port)
list of sentry nodes
private-peer-ids (nodeID)
none
unconditional-peer-ids (nodeID)
optionally sentry node IDs
addr-book-strict
false
double-sign-check-height
10
Sentry Node Configuration
seed_mode
false
pex
true
persistent-peers (nodeID@ip:port)
validator node, optionally other sentry nodes
private-peer-ids (nodeID)
validator node ID
unconditional-peer-ids (nodeID)
validator node ID, optionally sentry node IDs
addr-book-strict
false
Run this command:
For more information on technical set up, you may refer .
